Packaging Specifications: 20 kg/blue iron drum, 140 kg/blue iron drum, meeting the storage and transportation needs of different dosage scenarios.
Core Component: Organosilicon, combined with polymer components, free of aromatics, and meeting environmental protection requirements.
Product Performance and Advantages
Broad Applicability:
Suitable for solvent - free/solvent - based coatings, printing inks, UV - cured plastic coatings, as well as adhesive and sealant systems. It has good adaptability to the coating processes of various substrates (such as metal, plastic, and wood).
Efficient Defoaming Ability:
The synergistic effect of organosilicon and polymers can quickly eliminate micro - bubbles and large bubbles in the system. Especially in high - viscosity or UV - cured systems, it can effectively prevent surface defects such as craters and pinholes caused by bubbles.
Environmental Protection and Safety Characteristics:
Free of aromatic solvents, it reduces VOC emissions and is suitable for fields with strict environmental protection requirements such as food contact packaging and medical device coatings. At the same time, it reduces the health risks of construction personnel.
System Compatibility:
It will not affect the curing speed or film transparency in UV - cured plastic coatings, and will not interfere with the cross - linking reaction in adhesives, ensuring that the physical properties (such as adhesion and flexibility) of the final product are not affected.
Scope of Application and Scenarios
Typical Application Fields:
Coatings: UV - cured plastic paint (such as mobile phone shell coating), solvent - free floor paint, solvent - based metal anti - corrosion paint;
Printing: Solvent - based ink, water - based ink (needs to be tested with a special system);
High - gloss products with extremely high requirements for coating appearance (such as high - end home appliance panels);
Areas with strict environmental regulations (such as systems restricted by EU REACH regulations);
UV coating lines that require rapid curing (such as continuous plate production).
Usage and Storage Recommendations
Adding Method:
The recommended addition amount is 0.1% - 0.5% of the total formula amount. It should be added in batches under low - speed stirring to avoid damaging the structure of the defoamer due to high - speed shearing.
Compatibility Test:
When used for the first time, it is necessary to verify the compatibility with resins and curing agents in the small - scale test stage. Especially in UV systems, the film properties (such as hardness and yellowing resistance) after curing need to be tested.
Storage Conditions:
Store in a cool and dry place (temperature 5 - 30℃), avoid direct sunlight and contact with moisture. After opening, it needs to be sealed and stored, and the shelf life is usually 12 months.
